The wonear DarkContour Wave PET Acoustic Panel uses multiple narrow curved strips in a dark wood-grain finish to create a subtle low-contrast wall surface.
Unlike light geometric patterns that immediately dominate a space, this design relies on controlled shadows and small tonal differences between the decorative strips and the black polyester fiber base.
The result is quieter, more restrained and suitable for interiors that require a sophisticated atmosphere.
The vertical flowing lines add movement without producing excessive visual complexity. From a distance, the wall appears dark and unified. From a closer viewing position, the individual curved strips and wood-grain textures become more visible.
The wonear DarkContour Wave PET Acoustic Panel is suitable for cinemas, executive offices, media rooms, premium lounges, meeting spaces, studios, hotel corridors and dark-themed commercial interiors.
The base layer is manufactured from polyester fiber material and is available in:5mm/8mm/10mm/12mm
This layer helps absorb reflected sound inside the room and reduce reverberation caused by hard walls, ceilings, glass and flooring.
The product is particularly appropriate for environments where speech, media playback or background music forms part of the user experience.
However, it should be understood as a decorative sound-absorbing product rather than a complete soundproof wall system.
Where high sound isolation is required, contractors should combine the panel with a suitable partition structure, insulation, sealing and other acoustic construction materials.
The visible decorative elements are produced from MDF cut into narrow flowing shapes.
The MDF surface is covered with decorative wood-grain film through heat pressing. Buyers can select:
Front-surface film lamination/Front and two-side film lamination
Three-side lamination gives the narrow strips a more complete appearance under side lighting and at oblique viewing angles.
Dark walnut, black oak, charcoal grain, smoked wood and other low-reflective finishes can be evaluated.
The decorative strip width, wave depth and spacing can also be customized. Standard linear panels commonly use 25mm or 27mm slats with 15mm or 23mm gaps, while this narrow-wave style is produced according to the approved pattern dimensions.
Dark decorative acoustic panels respond strongly to lighting direction.
Under direct front lighting, the panel appears relatively uniform. Under side lighting, the curved MDF strips create fine shadow lines that emphasize the wave profile.
For this reason, the wonear DarkContour Wave PET Acoustic Panel can be coordinated with:Wall-washing lights/Recessed ceiling lighting/Warm linear lights/Concealed LED lighting/Low-glare spotlights
Lighting design should be considered during the project-planning stage because it influences how strongly the pattern is perceived.
Available 600mm-wide panel heights include:2400mm/2500mm/2600mm/2700mm/2800mm/2900mm
Larger formats include 1200 × 2400mm and 1200 × 3000mm.
Custom dimensions can be reviewed according to production quantity, wall layout, shipping and pattern continuity.
The minimum order quantity is 100 sheets per confirmed specification.
A 5mm polyester fiber substrate retains a certain degree of flexibility and may be used for selected curved applications.
Because the finished product contains multiple MDF strips, the requested bending radius should be tested before mass production.
The 10mm base is more rigid and is recommended for flat walls where consistent alignment and a stable finished surface are required.
The 12mm option can be considered for projects specifying a thicker acoustic material, while the 8mm version provides an intermediate choice.
A commercial contractor is building a private cinema connected to a media lounge.
The interior uses dark flooring, black ceiling panels and concealed lighting. A conventional light wood acoustic wall panel would create too much contrast and conflict with the intended atmosphere.
The designer selects the wonear DarkContour Wave PET Acoustic Panel for the side walls and rear lounge area.
Dark walnut film is applied to the curved MDF strips, while the black polyester substrate remains visible between the lines.
The subtle wave design provides decorative detail without distracting from the screen. Side lighting produces controlled shadows across the panel surface.
The acoustic substrate helps reduce sound reflection within the lounge and viewing area, supporting a more comfortable listening environment.
The contractor selects a rigid base for the flat cinema walls and confirms the exact panel sequence before installation.
Dark surfaces require careful quality control because scratches, dust and color variation can be more visible under strong lighting.
wonear checks:Decorative film surface condition/Dark color consistency/Curved-strip dimensions/Strip alignment/Gap consistency/Film adhesion/MDF edge quality/Polyester fiber thickness/Finished panel dimensions/Protective export packing
For large projects, we recommend placing the required quantity in one production batch to reduce the risk of visible finish differences between separate orders.
The wonear DarkContour Wave PET Acoustic Panel can be manufactured for distributors, importers, cinema suppliers, acoustic contractors and commercial interior companies.
wonear is a direct manufacturing factory rather than a retail trading shop.
We support:Wholesale purchasing/Project-based quotations/Custom decorative films/Panel-size adjustment/Pattern modification/OEM labeling/Export packaging/Container loading coordination/Sample verification/Repeat production
Our team has experience with international orders and can provide the necessary commercial and export documents according to the confirmed transaction and destination requirements.
The decorative film provides a finished surface, but panels should still be protected during handling, transportation and installation. Appropriate export packing is used for bulk shipments.
Solid-color or low-grain decorative films can be evaluated according to material availability and order quantity.
It can be used as part of a decorative acoustic treatment, but professional studio performance depends on the complete acoustic design, installation structure and tested material configuration.
Yes. Strip width, spacing and wave depth can be adjusted after production feasibility is confirmed.
Yes. Samples can be arranged after the required pattern, finish, thickness and commercial details are confirmed.
For wholesale pricing, distributor cooperation, commercial project supply or customized samples, send wonear the required size, substrate thickness, decorative finish, pattern, purchasing quantity and destination.
Address
No. 714, Building B, Kaiyuan Shangcheng International, Jinqueshan Street, Lanshan District, Linyi City, Shandong Province, China
Tel
