The Wonear Linear Wood Slat PET Acoustic Wall Panel is a decorative sound-absorbing wall solution developed for offices, schools, auditoriums, shopping malls and other indoor spaces where both acoustic comfort and visual consistency are required.
Its structure combines a black polyester fiber substrate with evenly arranged MDF decorative slats. The polyester fiber layer helps absorb reflected sound and reduce excessive reverberation, while the straight wood-grain slats create a clean architectural rhythm across large wall and ceiling areas.
Rather than treating acoustic materials as separate technical equipment, the Wonear Linear Wood Slat PET Acoustic Wall Panel integrates the acoustic layer directly into the decorative surface. This makes it suitable for commercial projects that need a warm wood appearance without covering the room with conventional plain acoustic boards.
The product is intended primarily for B2B purchasing, including overseas distributors, building-material importers, contractors, designers and commercial project buyers.
The bottom substrate is made from polyester fiber acoustic material and is available in four standard thicknesses:
5mm/8mm/10mm/12mm
The upper MDF material is cut into individual decorative slats and arranged at consistent intervals on the polyester fiber base.
Standard slat widths are 25mm and 27mm. Standard gaps are 15mm and 23mm. Other slat widths and spacing combinations can be produced according to project drawings, required visual proportions or distributor specifications.
Different wood-grain decorative films are applied through a controlled heat-press lamination process. Buyers can select either:
Front-surface film covering / Front surface plus two side edges covering
Three-side covering produces a more complete wood appearance when the panel is viewed from an angle and is often selected for reception areas, corridors and open commercial interiors.
Wood-grain color, texture direction and decorative tone can be matched to different design concepts, including natural oak, walnut, dark wood and customized commercial finishes.
The 5mm polyester fiber version retains a certain degree of flexibility. It can be used for selected curved walls, rounded columns and radius-shaped interior structures after the required bending radius has been evaluated.
The 10mm version is more rigid and cannot be bent easily. It is better suited to conventional flat walls where panel stability and a thicker acoustic base are more important.
The 8mm and 12mm options provide additional choices for projects with different structural and acoustic requirements.
For curved installations, buyers should provide the approximate radius or architectural drawing before ordering. Wonear can arrange sample verification before bulk production.
Available standard dimensions include:
600 × 2400mm/600 × 2500mm/600 × 2600mm/600 × 2700mm
600 × 2800mm/600 × 2900mm/1200 × 2400mm/1200 × 3000mm
Other sizes can be evaluated according to order quantity, pattern structure, packing restrictions and container loading requirements.
Minimum order quantity is 100 sheets per confirmed style and specification.
A contractor is preparing the interior finish for a school lecture hall containing concrete walls, glass partitions and a high ceiling. These hard surfaces create noticeable echo and reduce speech clarity during presentations.
The contractor selects the Wonear Linear Wood Slat PET Acoustic Wall Panel for the main side walls and rear wall. A rigid polyester fiber base is selected for flat-wall installation, while the light wood-grain slats coordinate with the desks, flooring and teaching equipment.
The straight vertical pattern visually increases the perceived height of the room. At the same time, the polyester fiber base helps control reflected sound and creates a more comfortable environment for lectures, meetings and training activities.
Wonear is a direct acoustic panel factory rather than a retail reseller. We support wholesale orders, project specifications, OEM cooperation and repeat purchasing programs.
Factory services include:
Customized panel sizes/Customized wood-grain films/Adjustable slat widths and gaps/Different polyester fiber thicknesses/Sample production before bulk orders/Private-label and packaging evaluation/Export documentation and container-loading support
During production, our team checks substrate thickness, panel dimensions, slat alignment, spacing consistency, film adhesion, surface condition and batch color consistency.
The Wonear Linear Wood Slat PET Acoustic Wall Panel is supplied for wholesale and project use. Single-panel retail orders are not our main business model.
No. It is primarily a sound-absorbing decorative panel used to reduce reflected sound and reverberation inside a room. Complete sound isolation requires a properly designed wall structure, insulation layer, sealing system and other construction materials.
Yes. Standard gaps are 15mm and 23mm, but other spacing dimensions can be customized according to drawings or project requirements.
The 5mm polyester fiber base is normally selected when flexibility is required. The actual bending radius should be confirmed through drawings or sample testing.
Yes. OEM labels, customized finishes and selected packaging arrangements can be discussed for distributors and long-term purchasing partners.
The standard MOQ is 100 sheets per confirmed style and specification.
For wholesale pricing, project samples, customized finishes or distributor cooperation, contact Wonear with the required size, base thickness, slat width, spacing, wood-grain finish, quantity and destination country.
Address
No. 714, Building B, Kaiyuan Shangcheng International, Jinqueshan Street, Lanshan District, Linyi City, Shandong Province, China
Tel
